Is the Molus X60 RGB LED from ZHIYUN any good?

Donate & Support

I've always wanted my photography education on here to be free, so although there is no paywall to any of my -Technique Tuesdays-, any and all support is greatly appreciated. ❤️

PLUS: Donate any amount and I’ll send you a link to the hi-res print version of my studio lighting book.

||

PLUS: Donate any amount and I’ll send you a link to the hi-res print version of my studio lighting book. ||

For many of you, the title likely tells you everything you need to know. If a 60W LED isn’t the type of light you’d ordinarily use, I doubt you’ll find any surprises here. But, if you think a very compact, full-colour continuous light has a space in your workflow, let’s see what it can do.

Disclaimer: As always, let’s clear the air here; I was contacted by ZHIYUN whereupon they offered to send over some of their lights. I don’t make a living or any direct money from reviewing products, so I’m typically pretty hesitant to accept them. Sure, ‘free-stuff’ sounds cool, but the cost of a light is very marginal compared to the cost of my time to test, retouch images and write a review! That said, ZHIYUN was relatively new to the lighting space and I’d recently heard of a few products they’d been putting out, plus I’ve been looking at single-point (S-fit) LEDs to compliment my LED panels so I agreed to take a look. TL;DR ZHIYUN have not and are not paying me to share my thoughts on these lights.

Who are ZHIYUN?

I wouldn’t ordinarily include the backstory and update you on the lore of a lighting company, but many of you won’t have heard of ZHIYUN and to be fair, neither had I 6 months ago. Established in 2015, ZHIYUN made its name with many award-winning image stabilisers and gimbals and in 2023 they announced their first line of LED lights. As I said, ZHIYUN is very new to the lighting world.

What immediately struck me about ZHIYUN, is their pride in being a Chinese brand. There are countless Chinese lighting brands out there, but nearly all of them aren’t keen to promote it. Nanlite, Aperture and of course, Godox are just a couple of the more famous lighting companies on the market today, but their Chinese origins aren't common knowledge among many of their customers.

As a child of the 80s myself, I’m aware of the stigma that many Chinese brands do their best to avoid, but these are different times today and China clearly produces many excellent products so it was refreshing to see ZHIYUN not have a Western brand name or be shy about their heritage. And rightly so, as the one thing that immediately struck me when I received these lights, was just how well made and robust they felt.

The ZHIYUN Lights

I mentioned at the top that ZHIYUN kindly offered to send several lights from their range so I could get a broader understanding of their lineup. I requested 3 of their more unique lights to take a look at, firstly we have the X60 which is the little RGB light I will be reviewing today, but I also requested some of their bigger, more powerful lights to test too. One of them was the Molus G300 and this was the one I was most intrigued about, not only due to its excellent looking design, but also its unique ‘Boost Mode’. Lastly, I got one of their most powerful lights in the form of the Molus B500. This is clearly an extremely bright LED and it's a more traditional approach to lighting in the classic monoblock strobe you attach to the top of the light stand without the now common trappings of extra cables, control boxes and transformers or many other powerful LEDs.

First impressions are great though and I aim to review all of these lights in the coming weeks, starting of course with the little X60.

What is the Molus X60 RGB light?

You may not be familiar with the X60 and I’ll share images of this little LED light below, but this is a palm-sized full-colour LED light that’s capable of the ‘full’ RGB spectrum and I’ve put that ‘full’ in quotations for now as we’ll come back to it.

You can see how small the light is in relation to the lightstand in shot, but it’s roughly the size on a small micro 4/3s camera and without the battery it measures 100 x 71 x 56 mm. As you’d expect, the weight matches its size and it weights in at around 320g (or just over 11 ounces for those still living in old England).

The little 60W light provides white light in a Kelvin range from 2700K up to 6500K and like all of these LED lights today, it also has a range of onboard lighting effects like candle, paparazzi, ambulance, as well as a host of others, you get it. Those effects are nice to have, but typically not very useful for many of us photographers. There is one other feature on the light, and that's simply called ‘Music’.

It’s unlikely that it’s of use to many of my more esteemed readers here, but I’ll explain it anyway. Set this light to ‘Music’ mode and a small microphone will listen out for noises and flash/pulse the light in a user-assigned flourish of colours. Granted, as a middle-aged white guy, I personally can’t imagine a use for this feature outside of my old disco-biscuit fuelled evenings at the local rave of yesteryear, but music videos and dance parties would arguably benefit from it I’m sure. Ironically though, the ‘Music’ feature actually has surprisingly deep functionality. You can assign up to 7 pulses and each of those 7 pulses can be individually coloured via a hue from 000 all the way up to 360. I spent faaaaarrrrr longer than I care to admit playing with this feature as, like said, it’s very customisable. Maybe I could program a way to pulse colours in a long-exposure image!!!

Those are the core features of this light and as you’d expect, these are all available at the top level of menus as soon as you switch it on. Navigation through the menus is all done via the 2 big knobs you see here. Clicking the left one in moves you forward in the menus and clicking in the right one adds extra functionality in many of the menus. For example, whilst in the CCT mode, clicking the right dial in brightens the light in 25% increments. As you’d expect, both of these dials also spin to adjust the highlighted values.

Design

Let’s be honest, in today's market it feels like there’s a new LED lighting company being announced every week. For them to stand out, they really need to offer something utterly unique, or at the very least, look super-cool! Although the X60 seems a very capable light, its look, along with the other lights in ZHIYUNs line-up, is very cool!

As with many other lights like this, size and the lack thereof, is vital. The ZHIYUN aesthetic is extremely pared back, so much so in fact that many of the typically internal parts are now presented as a design choice on the outside of the light. Elements like the fan, its grill and even cooling fins are used in a very effective way as the actual housing of the light. Couple that with some semi-transparent covers and retro knobs and you have a very distinctive-looking light in today's over-crowded market. This may seem gimmicky, but they pull it off in my opinion, not to mention that the design is actually very conducive to running the light as it now has tons of airflow. Again, this is personal preference, but I really like the distinctive look, plus this isn’t just designed with TikTok BTS videos in mind either and this same aesthetic is carried over onto their far more powerful and professional lights too.

What’s Included in the X60 RGB Combo Pack

Molus X60 RGB Light
Mini Reflector+Diffusion Dome
Power Adapter
Adapter Organizer Bag
Grip Battery
60W PD Charging Cable
Cool Bag

Price: £329 - Price from official ZHIYUN website - August 2024

Core Functionality

Unless you’re looking at this light for specific use cases, you’ll most likely be spending your time in the core modes of CCT and either HSI or RGB.

CCT Mode

This is the white-light mode and this is simply the brightness via the DIM option from 0% to 100% in single-percent increments. The CCT option or the ‘Correlated Colour Temperature’ in case you were curious, is the option we adjust to get a variation in colour temperature. The Kelvin range on the X60 goes from 2700K up to 6500K. Not the hugest range, but typically more than enough for most people to either add a little personality to the colour of their light or for normies to colour correct their light to match the surrounding tone.

No Tint Adjustment

One feature (although I don’t really consider tint to be a ‘feature’ in today's lights) that wasn’t present to my knowledge, was a ‘tint’ adjustment.

Above you can see images taken at each of the major Kelvin steps and I simultaneously matched the Kelvin of the light to the Kelvin in the camera for each image. To be clear, this is far from a definitive test as there are often variances in white balances from camera to camera and manufacturer to manufacturer, but it does illustrate a deviation in the tints (green/magenta) at both the top and bottom end of the Kelvin ranges. For example, in the image included here, you can clearly see the 6500K sitting above the 3500K and the former is arguably more green than the latter. Note that these tests were done at full power to allow for the LEDs to achieve their best possible colour.

Typically, this isn’t a major issue due to you being able to white balance it out in post, but with multiple lights on set and often from multiple brands, this becomes harder to do. This isn’t a unique problem to ZHIYUN however and many lights have this issue with the extremes of the Kelvin range, but many RGB lights also include the ability to ‘tint’ the light. I was surprised to not see the option here and I even tried various button combinations to see if it was hidden somewhere. It is a full RGB light so technically it should be able to add tint to these Kelvins and we may even see an update to include this function in the future.

Brightness across the Kelvin range

If you’re unaware, LED lights typically create a Kelvin range by utilising two sets of LEDs. One warmer and one cooler. It’s due to this that nearly all LEDs are brighter when they’re sitting around the middle of their Kelvin range as this is when both the warm and cool LEDs are both on. For this little light, I found it to be brightest at the coolest or 6500K setting, but it was very negligible and overall extremely consistent across the range.

Measured at full power 1m from the light meter:

2700K - ISO 100 1/60th f4 + 8 tenths of a stop
4600K - ISO 100 1/60th f5.6
6500K - ISO 100 1/60th f5.6 + 2 tenths of a stop

Of course that brings us to the one question every photographer has ever asked me about any LED light ever, “How bright is it?”

*Image taken at f5.6 / ISO100 / 1/60th / 6500K - Light 1m away from wall*

Brightness

As I mentioned at the start, the title tells you what you need to know, it’s a 60w light. This is not a bright light for photographers and it won’t be bright compared to what you’re used to as a speedlight or strobe user. I gave you a real-world example of brightness above and with camera settings of ISO 100, 1/60sec at f5.6 at 1m away. No, you won't be overpowering the sun in any situation, but if you shoot a lot of video or you comfortably work indoors in a light-controlled room or studio, this won’t be a problem. I’ve seen several videographers state that this is a “bright light” and they aren’t lying, for videographers and film-makers, this is bright enough for a lot of their work where a continuous light in videos is needed.

Brightness Range

I will mention one last aspect regarding the brightness of this light and that’s the range of brightness. What I mean by that, is the brightness at 1% power compared to 100% power.

What you may notice, is what you don’t notice. By that I mean there’s very little difference in brightness at 1% power versus 100% power. Of course, lower-powered lights typically have less range, but this light only having a little over 1 and a half stops of range is very limited. Chances are you’ll always have this light cranked to 100% anyway, but it is noticeable how little it changes when you turn it down and is still noticeably bright at 1%. The silver lining here is that you can significantly extend the battery life by turning it down to 50% and you’ve only lost half a stop of light.

Colour

I’m sure it’s of no surprise to anyone that I’m a very harsh critic when it comes to colour in my lights, so just be aware that I’m approaching colour in these lights from a borderline neurotic point of view.

LED lights, specifically RGB LED lights have made my life considerably easier since their introduction. As many of you know, I use LED panels with 16 million+ colours at my fingertips. Compare that to my 20 or so physical sheets of gel colours that I typically use and that’s an awful lot of colours to play with. Now, I don't think this little ZHIYUN light has 16 million colours, but it certainly has an awful lot and certainly a lot more than 20.

HSI or RGB?

One interesting aspect of this little light, is the ability to adjust your coloured light via either the HSI or the RGB mode.

HSI

HSI or Hue, Saturation, Intensity is actually represented on the light via the DIM control instead of Intensity. The DIM is adjusted in single percents up to 100% and the HUE is adjustable via 361 degrees from 0 to 360. and lastly, the SAT(uration) is adjusted in single percents from 0 to 100.

This HSI mode is likely to be the more intuitive one for adjusting colour for many, as you simply select a HUE and then adjust the brightness and saturation, quickly and easily from there.

RGB

The feature of a full RGB mode is a nice one though as it offers a lot of very fine control over the colour you’re after. As you’d imagine, you have all the RED, GREEN, and BLUE adjustments from 0 to 100 percent. In this mode, you also have the DIM from 0 to 100 as well and it’s with these 3 colours and DIM adjustment that you’re seemingly able to access more nuance in colours than the HSI mode, but it is less intuitive and you need to know your colour theory to get the most from this.

It’s worth noting that this RGB mode is not done via a typical 256 value, as, like I mentioned above, it uses percentages instead. Again, not a huge issue, you just won't be able to copy across an RGB value from artwork in Photoshop to match it like-for-like on set for example.

My thoughts on the Colour from this LED

At the start of this article, I put ‘full’ RGB spectrum in quotations and promised to come back to it. I also want to remind you that I’ve dedicated the best part of my career to fully understanding colour and as a result, I can be pretty critical of it in my lights. With all that said, I will state that I found both the HSI and RGB modes to have several colours that ‘stepped’ aggressively, specifically in the pink/red/orange range as well as the green/blue range. By ‘stepping’ I mean that there was a noticeable jump between several colours, even though I was only adjusting its colour by a single increment. In contrast to this, many of the other colours were extremely smooth with also no visible notch in colour as I scrolled through the spectrum. This is not a dealbreaker in any way, but it was noticeable.

FX

I’m not sure if people actually use these FX, but they are on all LED lights today and I’m sure they’re a nice feature for some. With that in mind, I’ll quickly outline what’s included with the X60.

Included are all the usual suspects:

SOS - PAPARAZZI - CANDLE - BAD BULB - TV - LIGHTENING - CCT FLASH - CCT PULSE - CCT LOOP - POLICE CAR - DISCO - FIREWORKS - HUE LOOP - HUE FLASH - HUE PULSE

- ok I didn’t realise there were so many options. I regret starting to type them all out now!!!!

All of these filters have a DIM value from 0-100 as well as a SPD (speed) option with varying values. Plus, many of them either have CCT adjustments or further options like variants and even colour spectrum inputs.

Music

I’ve spoken about this mode above, including some of its functionality, but if your year of birth starts with a 2, you probably already know all about this mode anyway.

Results

I get it, I’m more of a lighting-nerd than most, but stats only paint so much of the picture. How does the light actually perform? I was able to test the light in various lighting setups and although I tested the light on its own, I also used it in conjunction with the other ZHIYUN lights too. I will state which light was used where and I aim to review those other lights in the coming weeks.

Set 1 - ZHIYUN X60 + Molus G300 - Kelvin Key & Fill

*Here we see the Molus G300 with Parabolic Softbox set to 6500K*

*Here you can see the warm light from the front and the cool light behind*

Long-time followers will no doubt have seen me use this setup countless times in the past, but essentially it’s just a key-and-fill setup. Here the key-light is the X60 and that is set to the warmest value it has of 2700K. Note that the X60 also has the included diffusion dome attached too. The fill-light is the Molus G300 with the ZHIYUN Parabolic Softbox and grid attached (links to both of these are included at the end of the article). The Molus is set to the coolest temp it has of 6500K. We set the camera to a low/warm Kelvin value of around 2000K-3000K to neutralise the warm light from the X60 and that’s about it.

Camera Settings

Camera - Nikon D850
Lens - DC-Nikkor 105mm f2
Shutter Speed - 1/250th
Aperture - f2
ISO - 100
Kelvin - 3000K
Focal Length - 105mm

Comments:

It’s worth repeating those camera settings, 1/250th, ISO 100, f2. Yes, I am using a fill-light behind the key, but those settings require a decent amount of light and remember, my key-light here is a little 60w LED and it’s set to the very lowest Kelvin which we know produces a little less light and it has the diffusion dome attached. Even at 60w and brought in close-ish, it produces a healthy amount of light.

Set 2 - ZHIYUN X60 - Solo Set

As you can see here, just a single X60 up high and angled down - it's also worth noting that the X60 has the diffusion dome attached too.
Lastly, this was a quick shot I wanted to grab of just the X60's light alone and because of this, the X60 was still set to 2700K. I quickly switched my cameras Kelvin to match it and got a shot that was correctly white-balanced. The colouring you see in my final shot is purely aesthetic as I colour-graded it in post.

Camera Settings

Camera - Nikon D850
Lens - DC-Nikkor 105mm f2
Shutter Speed - 1/250th
Aperture - f2
ISO - 100
Kelvin - 2700K
Focal Length - 105mm

Comments:

It’s rare that any of us only use a single light in a studio, but I did want to grab a few shots with all other lights off, just to see the quality of light from this unit alone. This shot had the diffusion dome on and I doubt I’d even use this light alone without it attached. The results were clean and no odd double shadows or fringing were visible on the shadow transitions.

Set 3 - ZHIYUN X60 - RGB Set

Camera Settings

Camera - Nikon D850
Lens - DC-Nikkor 105mm f2
Shutter Speed - 1/125th
Aperture - f2
ISO - 30
Kelvin - 4000K
Focal Length - 105mm

Comments:

There’s a slight chance that my star-pupils are questioning the above images. I clearly state that I only used 2 lights, one of which was the X60, a full RGB LED and the other was a ZHIYUN MOLUS G300….. which isn’t an RGB light.

Can you see why you might be questioning the above images now? I’m only using the X60 RGB light to create that beautiful red colour, the second, blue colour is coming from a Kelvin shift trick. With very bold colours like reds, you can push the Kelvin around quite dramatically and it has little effect on the bold, red colour. So here I’m doing just that as I have my G300 set to 6500K which is producing the subtle blue shadow-light when I set my camera to 4000K.

Nerd-talk aside, the RGB mode works as you’d expect aside for the aforementioned RGB spectrum and the red used here was very rich and clean.

Many thanks as always to my patient-ish model: Jaye Hicks

Usability

Attachment

The X60 comes with a single 1/4-20 attachment at the base for all manner of tripods and light stands. It is flat to the base though so you can’t angle the light in any without additional ball-heads etc.

Battery

The battery sits on the side via a very stable and snug clip. The battery can easily be popped off and on with a single hand too. The battery itself is touted as lasting for around one hour at full power. I was using it constantly at varying powers during my shoot and mine lasted two hours. It took around 3-4 hours to fully charge.

One nice feature of this light is the ability to run it via the power cable it comes with and you don’t need the battery to be attached to do this.

One slight annoyance is that the battery can only be charged via the USB-C cable. Not a big deal, but I had to charge my battery via my Playstation 5 as it doesn’t come with a standard plug out of the box.

Modifiers

There are a handful of standard modifiers available for the X60, but if want something specific you may need to use third-party light-shapers. Also, the ZHIYUN website clearly states that the X60 is compatible with Bowens modifiers and sadly that is not the case. The X60 has a proprietary ZY-Mount that you first need an adapter for before you can use this light with Bowens modifiers. There are a couple of different adapters, so be sure to use the one that works on either X60 or X100.

Connectivity

I personally don’t tend to faff around with all the different lighting apps when I’m shooting, but I know many of you have asked me to include these options in my reviews, so I did download the ZHIYUN app to test it.

The app is called the ZY Vega and once downloaded you get prompted to sign your life away via a trillion page privacy policy (can you see how small the scroll icon is on that picture above!). I did sign it for you guys (you’re welcome!), but once inside, it's extremely smooth. I turned the light on and the app found it immediately. In fact, I even closed the app and turned off the light, reopened and switched the light back on and it found the same light again straight away.

The options in the light are clear and easy to use. You have your CCT (white light) mode and here you choose to manually adjust the colour or opt for the CCT Gel presets page. Furthermore, you can even scan the environmental lighting in your room with your phone via the CCT PAIR and it will translate that tone to your light. Simple and very quick and easy to use, even for an idiot like me.

The colour options are just as robust and inside the COLOUR tab (typo in the app), you can adjust the light via the HSI or RGB mode. Remember how I said earlier that you couldn’t dial in an exact 256 RGB value? Well, here you can and you can see in the image above that it translates it to percentages on the light. Odd that the light doesn’t support the 256, but at least it’s in the app if you need it.

Lastly, there’s a colour picker mode. You point your phone camera at a colour and it will translate that colour to RGB values on your light instantly. Plus, you can then save these as presets for later if you'd like to.

Overall, I was very impressed. I ordinarily NEVER use the LED apps as they’re notoriously bad at initially connecting (some lights have very awkward pairing procedures) and even then they often don’t stay connected and the whole process of re-pairing starts again. This seemed solid though and I will likely test it on a shoot next time.

The only downside was the vast amount of T&Cs you need to sign, but that said, it didn’t require you to register the lights, nor set up an account or even sign-in in any way. All of which is a plus!

Final Thoughts on the X60

Let’s be honest, that review was waaayyyyyy more detailed than it needed to be. After I finished writing this I checked some other reviews and they pretty much said, ‘its a really nice light that is small enough to put in my bag wth my sandwiches, you should definitely get it’. You gotta love YouTube.

Hopefully, there are some other super-nerds out there like me who found some of his useful as I know I find this extra detail valuable when there are so many options out there right now.

So to sum up:

PROS:

Very small and lightweight
Looks very cool
Bright for its size
A (nearly) full RGB light in this small form factor is actually pretty impressive
The app was surprisingly robust - I’m glad some of you moaned about me not including this last time!
Can be powered directly without the need for the battery to be attached

CONS:

Not a huge range of brightness control
Not directly Bowens mount compatible
No tint control in CCT (white-light) mode - I’d be amazed if this doesn’t get patched in

Who is this light designed for and should you get it?

I’d argue that this light is more suited to video people. The 60W is bright for video but is limiting for stills shooters, especially those not working in a studio. That said, I could absolutely see myself using this light as a hair light to add some strong specularity from behind and most definitely as a background light as it’s so small, that it’d be perfect for hiding behind the subject.

I also think this light is decently priced too. I see a lot of small LED lights emerging right now and some are far more expensive than this and offer far less.

Closing Comments

Hopefully, you found this review helpful and although it’s highly doubtful that I’ve forgotten anything in this compendium if you do STILL have questions about the light that you somehow think I may have missed…. Google is available. I’m joking of course and I will gladly answer any questions you have….for a small fee.

Products Used

ZHIYUN

As I mentioned at the top, ZHIYUN sent me these lights to review, but I am not being paid to share my thoughts. Below is a link to the lights and modifiers I used, supposedly if you use them, I will earn a very small amount of commission from them. It is minimal though and beer money at best so if you find a better deal elsewhere, please feel free to take it. All that said, they have provided me with a discount code for you to use on their official site. Use code ‘JakeHicks’ to earn 10% off anything on their site.

Use Code: 'JakeHicks' for 10% Discount on the ZHIYUN website

||

Use Code: 'JakeHicks' for 10% Discount on the ZHIYUN website ||

ZHIYUN X60

This link is for the COMBO RGB Kit I had. That includes the battery, power cable, diffusion dome, carry case etc.

ZHIYUN X60 Website Link

ZHIYUN MOLUS G300

I did use this light in nearly all of the setup above, but I am still in the process of reviewing it. Spoiler alert, it is an excellent light so I have included a link to it here in case you wanted to learn more before my review was out.

ZHIYUN MOLUS G300 Website Link

ZHIYUN 90cm Parabolic Softbox

An excellent, generously sized softbox that is very well made and seems robust - most importantly, it’s very easy to put up!

ZHIYUN 90cm Parabolic Softbox Website Link

JHP Livestreams…

I livestream every other Tuesday night via YouTube and there I answer your questions, critique your shots, take community images into Photoshop to work on them and discuss all manner of lighting tips and techniques. I look forward to seeing you and your work there real soon. Jake Hicks Photography - YouTube

All of my more advanced lighting classes are now available online!

||

All of my more advanced lighting classes are now available online! ||

LEARN MORE ABOUT MY ONLINE WORKSHOPS

Why You Should Link Your IG to Pinterest

Donate & Support

I've always wanted my photography education on here to be free, so although there is no paywall to any of my -Technique Tuesdays-, any and all support is greatly appreciated. ❤️

PLUS: Donate any amount and I’ll send you a link to the hi-res print version of my studio lighting book.

||

PLUS: Donate any amount and I’ll send you a link to the hi-res print version of my studio lighting book. ||

I’ve spoken about the merits of Pinterest several times over the years, but there are still very few photographers who actually use this powerful site to benefit their business. I get it, it’s yet another platform for you to keep updated, but in reality, you need to do very little to maintain your work on Pinterest, but you have everything to gain from doing so. Here’s how.

I’m sure I’ve mentioned this before, but Pinterest is actually the reason I got my ‘big break’ all those years ago. TL;DR my images were heavily featured in a moodboard at a client meeting and at the time my specific gelled lighting style was fairly unique (hard to believe now I know). It was from that moodboard that the client reached out and larger projects ensued and snowballed from there. Sure, you could argue that times have changed since then, and although you are right, the same reasons Pinterest worked back then are the same reasons it still works today.

The issue with Instagram today

I don’t think it’s a particularly ‘hot-take’ to say that modern IG is not the same photography-centric platform it once was all those years ago. Be honest, IG is now predominantly just micro-clips for Gen-Zs gnat-like attention span and young ladies who ‘forget’ to get dressed sharing their ‘hustle’ to the middle. I get it, I’m old, sure, but think about who IG is designed for today, is it your clients? Why are you posting on there? Are you posting on there because you were already on there anyway checking out the latest pics from fellow togs and thought, “I should really post something too” or are you logging in to maintain your rigorous marketing schedule? Think about who actually likes and comments on your posts. Are they your clients?

I’m certainly not saying IG can’t work for you and yes I’m being cheeky and somewhat cynical, but I do want you to take a moment and remember why you use IG and do you use it for business or pleasure.

Good News: Keep using Instagram and Pinterest like you always have

I’m sure this article sounded like I was about to say stop using IG as it’s a waste of time, but ironically that’s the opposite of what I’m saying. The point of this article is to convince the Pinterest cynics among you to take 2 minutes to link your IG account to Pinterest …..and then go back to completely ignoring Pinterest.

Let me be very clear, I SPEND ZERO HOURS ON PINTEREST EACH MONTH

That’s right, like you, I don’t use Pinterest at all either as it does all the work for me and I do quite literally nothing. This is in stark contrast to my main social platform, my Facebook Page. There I post 5 times a week whereupon I spend (far) more time than I should writing about the images I share there. I’ve done that consistently every week for close to a decade now. Instagram is a different story as I only post there a couple of times a month at best. The reason for that is a topic for another day, but IG is not suited to communicate and engage with others. It wants the user to ‘like’ something and then very quickly move on to the next image/video via 9 ads of junk that I tell myself I don’t need. Facebook is certainly dated now, but it does allow for a discussion in the comments and even the ability to share ideas, links and other images directly within that same comments section. I personally prefer that dialogue over simply farming engagement, but that’s just me. The point I’m making here is that I’m about to show you engagement numbers for these platforms and the IG ones are almost irrelevant because of my lack of uploads.

Engagement Splits

Yeah, this is where you really thought about clicking away, right? Engagement talk is as about as exciting as kissing a porcupine's bottom, so I will keep it extremely brief I promise.

Below are the engagement/impression numbers from the last 90 days for both Facebook and Instagram.

Below are the engagement/impression numbers for Pinterest from the last 90 days

For clarity, engagement/impression definitions can vary, but for the most part, it means that when someone was shown my image, that counts as 1 engagement/impression.

Return on your Investment

As you can see, I have nearly 4 times the engagement on my Pinterest versus my Facebook Page. This alone is fantastic of course, but you have to remember that I spend many, many hours a week nurturing my Facebook Page and, I’ll say it again, I SPEND ZERO HOURS ON PINTEREST EACH MONTH

How & Why is This Happening?

There’s no secret-sauce here, I really do spend zero time on Pinterest each month and the biggest factor that sets Pinterest apart from all the other platforms is its ‘evergreen’ content. I’m sure you all know by now, but your shiny new photo has a lifespan on IG and FB of a couple of hours at best. You post a shot, if the handful of people that shot is shown to like and engage with it, that same shot will then get shown to a slightly larger new group of people and the cycle perpetuates until the image stops being popular to the groups of people it’s shown to. This typically all happens during the first couple of hours of sharing the image and you’ll see drastic diminishing returns for any time after that. And by ‘drastic’ diminishing returns, I mean that after that initial share, almost nobody will ever see that image ever again on your platform.

Pinterest is the total opposite of that. Almost nobody will see your Pinterest image at first, but that image only grows in value the longer it's on the platform. I have some images on there from when my work took off in the early 2010’s and some of those images from 10 years ago have many hundreds of thousands of impressions. I say that although it’s hard to track separate images beyond 6 months, an image of mine from April 2024 is already at 5000 impressions as an example.

Stop Seeing Your Photos as Old & New

The key here is to stop thinking of your photos as old and new. A client, customer or viewer doesn’t know if you took that photo of yours this week or 5 years ago. It’s simply not important as it’s ‘new’ to them. Pinterest capitalises on that and specifically shows the viewer images similar to what they are looking at based on the look of the photo, not the age of the photo like all other platforms do.

Convinced to Do Almost Nothing Yet?

So how can you capitalise on this now, and then simply forget about it forever?

I’ve personally done a couple of things, firstly, I allow Pinterest ‘pins’ to be pinned directly from my website and secondly, I’ve linked my Instagram to my Pinterest.

Enabling Pinterest ‘Pins’ on your Website

First off, let's look at my website and enabling Pinterest on there. This won't be as relevant to some of you as I know fewer and fewer people today have a website, but here’s what I did on my Squarespace site in case it’s relevant to you too.

First off, head to the Settings > Website > Pinterest Save Buttons

Here, just enable the Pinterest Save Buttons, how you want them to look and where they’ll appear on your site.

That’s it!

Now, all of the images not on your main portfolio can be pinned by anyone clicking on that Pinterest button and anybody clicking on that image on Pinterest will track back to your site.

I won’t get into it here today, but I know many photographers have mixed feelings about mood boards and whether they are theft or infringe on copyrights. I know for a fact that many of my images get placed on mood boards and brought to other photographers for them to ‘copy’, but it’s almost impossible to stop that happening. Sure, that will happen, but like me, maybe that client loves the shots so much that it leads to something else in the future. Again, I know everybody has their love/hate relationship with mood boards, none more than uber-famous portrait photographer, Jill Greenberg who certainly doesn’t hide her disdain for mood boards.

*Image from Jill Greenberg's site and her thoughts on mood boards. You have been warned!!!!*

As always, huge respect for Jill for always speaking her mind!

Linking your Instagram to Pinterest

We finally got there, here’s how to link your Instagram to Pinterest.

First off you’ll clearly need a Pinterest account - it’s free to get one.
Log into your account
Click on the down arrow in the top right next to your profile picture
From here choose ‘Settings’
In the next window, click on ‘Claimed Accounts’ on the left-hand side
New options will appear including your website and below that, ‘Instagram’
Click on the ‘Claim’ button
Allow Pinterest access to your Instagram account via the following pop-up
Lastly, choose where the IG images will go, your Profile is fine. Click Allow
Plus, if you want the last 90 days’ worth of IG shots to be uploaded, check the box below too.

That really is it. Yes, I turned a 30-second article into 10 minutes, but what’s a Jake Hicks article without a little unwarranted backstory, history and lore? You want 30 seconds? You know where you can go ;)

Once you’ve linked your accounts, you’re done and you really do ‘set-it and forget-it’. Your IG images will slowly be added to Pinterest for others to come across as you post them to your Instagram like you normally would.

Closing Comments

As I mentioned at the start, I have a special love for Pinterest as it really did get me my first big break all those years ago thanks to, you guessed it, someone including my images in their Pinterest moodboard to a client. Some photographers hate it and I certainly get that after all It’s unbelievably annoying hearing that clients have taken your images to another photographer for them to ‘copy’ for cheaper. But if it works out in your favour once in a while, it’s still better than never. Plus, it takes like 2 minutes to set up and then you can go back to screaming into the void that is Instagram!

JHP Livestreams…

All of my more advanced lighting classes are now available online!

||

All of my more advanced lighting classes are now available online! ||

LEARN MORE ABOUT MY ONLINE WORKSHOPS

Lighting Setup: Beautifully Soft DIY LED Top Light

Donate & Support

I've always wanted my photography education on here to be free, so although there is no paywall to any of my -Technique Tuesdays-, any and all support is greatly appreciated. ❤️

PLUS: Donate any amount and I’ll send you a link to the hi-res print version of my studio lighting book.

||

PLUS: Donate any amount and I’ll send you a link to the hi-res print version of my studio lighting book. ||

Many of you already know I’ve predominantly switched all of my lighting to LEDs in the last year or so. But why? Was it the incredibly easy-to-use ambient light that shows you in real-time what you’re going to get? The millions of instantly accessible colours? The quick Kelvin adjustments? Sure, these are all ‘nice’ to have, but they’re really only offering me incredibly convenient options for what I could already do. The main reason I switched, is light quality.

The biggest difference for me switching over to LED from flash aside from the incredible ease-of-use that almost makes me feel guilty of cheating whenever I use them, is that unique and beautiful light quality. I’ve already spoken about this at great length in the past so I won’t go into it in detail again here. If you’re curious then I’ll link some previous articles below that explain it further.

The main differing factor to remember when compared to flash, is the shape of the light itself. Flashes push a lot of very bright light out from a single point aka the small flash tube. LEDs and I’m talking about LED panels specifically here, spread that power out across hundreds of small bulbs and each of these individual bulbs pushes out a little bit of light.

*This is a page from my new Colour 2.0 course workbook, but it simply demonstrates how light from flashes and LED panels starts out very differently.*

So what?

I’ve gone into detail in the past covering why collimated or light rays travelling parallel to one another produce more beautiful looking light on our subjects, so for today, I’m going assume you’re up to speed on that, but please check my previous articles for more details and I’ll link and relevant ones below.

*My thoughts on why LED offers something unique vs flash*

*A look at what causes ‘hot-spots’ and how we can prevent them*

We know that evenly distributed light that comes from modifiers like Fresnels and parabolic reflectors produce cleaner-looking light and we know that large LED panels replicate that look by also evenly distributing their light over a larger area compared to pushing it out from a single point, but how does that distribution affect the exposure?

LED Panels and Light Drop-Off

If you’ve switched to LED panels from flash like I have, you’ll know that your muscle memory for lighting is a little off. I’ve been using flash for over 25 years so my experience allowed me to move my lights around a set almost instinctively knowing how much power I’d lose by moving X light 2 feet back etc. When switching to LED panels I very quickly noticed that the light drop-off rules I was so familiar with, were no longer applying. The more experienced among you will be aware of the ‘inverse square law’ and how it guides us on how light will diminish evenly over certain distances. The catch is that ‘law’ applies to single points of light and LED panels are not single points of light and thus their light falls off differently.

This is not a bad thing however and there are a lot of ways in which we can use this knowledge to our advantage with LEDs and I’ll explain that in a bit.

*This is a crude illustration of what I mean by singular points of light spreading light very differently when compared to larger panels of LEDs*

If you’re reading this after switching to LEDs and you’re thinking, ‘I’ve not noticed anything’, that could be totally understandable as these panels are not truly ‘collimating’ the light and it only appears to do so when you use the panels very close to you subject like I do. Why do I do that? I place my lights very close to my subjects to maintain control of that light. If I pull it further away, I need to turn the power up and now I lose control of all that light bouncing around. You can get away with working like this if you’re using multiple white lights, but when you’re using lots of coloured lights, you absolutely cannot allow those lights to fall on top of one another. Keeping lights close to the subject keeps you in control of that light and allows you to maintain strong colours that are uncontaminated by other lights.

In the above example, I’m using an LED tube and not a panel, but the principle of spreading power evenly over a large area still applies. See how the pink light spreads down the body very smoothly and evenly on the final image on the left? Also, see how the pink light loses its power almost immediately on the body? Look at the far left (her right shoulder), and see how the pink barely reaches that side of the body, even though the light is only mere inches away from it. This is only possible thanks to the hundreds of small lights all throwing a little bit of light compared to the right hand example where we have one big light in real-close that would easily over-expose the face and then also not spread down the body.

TL;DR If we have larger light sources like LED panels and tubes made up of lots of small lights, they put out an even wall of light. Compare this to the singular point of light like a flash which produces an explosion of light from a central point.
One produces soft and even light and the other produces hot-spots of light.

The nerd-talk is nearly over, but I wanted to highlight how LED panels and tubes spread light as this entire setup takes that knowledge and puts it into practice to produce some of the most beautifully soft and even light I’ve ever crafted. Now when I show you the setup and explain the process, the resulting light should make a lot more sense to you…… and maybe it’ll make even more sense why it’ll look terrible if you were to swap out my suggestions and throw a softbox on the floor instead.

The Setup

Below is the setup I used to create the following final images. I will also include diagrams of alternatives for flash users and of course, for those of you who don’t want to suspend that mess above your model.

*Top light close up of the ‘contraption’ its encased in*

*Close up of LED tubes surrounding stool*

*Early test image before I switched to the blue top-light - Here you can clearly see the incredibly smooth and quick drop-off of light down the body.*

The above raw test image of the model before I switched the top-light to blue illustrates the beautiful drop-off of light I was referring to earlier. See how the face is bathed in super-soft light, but also see how there is almost no light falling down the body. Look at her left wrist in this shot and see how it has almost no white light falling on it.

TL;DR/ADHD/Artist Setup Explanation

Setup white background behind subject
Place subject about 3ft/1m in front of that
Suspend AEOS 2 Pro LED light above the subject
Attach the DIY scrim and skirt to top-light
Assemble 3x 4ft tubes around the model (one in front and one either side)

Kit Used

1x Rotolight AEOS 2 Pro
3x Rainbow Series 320-Degree RGB LED Neon Light Tube
White Scrim/Diffusion Material
10m Paracord
Large Silk Painting Frame 100cm x 100cm
Black Velvet
C-Stand
White Backdrop

Camera Settings

Camera - Nikon D850
Lens - DC-Nikkor 105mm f2
Shutter Speed - 1/125th
Aperture - f2.8
ISO - 200
Kelvin - 4500K
Focal Length - 105mm

The DIY Top Light Modifier / AKA The Monstrosity

Below I’ll list out the parts and then you can see the DIY top-lights final-form.

Parts Required

I got all of my items from either eBay or Amazon. Ordinarily, I try to get things from anywhere but Amazon, but sometimes it’s just inevitable. Have a look around, but that scrim/diffusion material I use all the time so I definitely recommend getting that, even if you don’t use it on this shoot.

Step-by-Step Assembly

*1. Suspend silk frame from C-stand via paracord*

*3. Suspend your light (AEOS 2 PRO) from C-Stand via Super Clamp*

*5. This should now be good to use, but check for light-spill first*

*2. Clip your diffusion material across the silk frame*

*4. Cover light with black velvet to prevent light spill*

*6. If done correctly, you should have a very clean and even light from below*

Okay, so hear me out!

I get it, you probably looked at that mess of wood and string above and think I’ve lost my mind. That’s fair, but the main purpose of this monstrosity was to test a theory and yes, there is still clearly a ton of room for improvement.

The main aspect I wanted to test here, was to include a mini-wall of light aka an LED panel that has a very even spread of light and a very fast drop-off of light down the body. Then I wanted to use that light very close to the top of the subject and soften and control that light in a small space.

The test was extremely successful in my mind and I absolutely adore the final results which I’ll share below now.

The Results

Click to enlarge any of the shots below.

Model: Saida

Breaking it Down

I’ve spent a lot of time talking about that top-light and not much about the LED tubes acting as fill-lights below. The main reason for this is simply that I’ve spoken a lot about the qualities of LED tubes in the past and I’ve used them a lot in many recent articles. That said, I will cover why I’m using them here as a fill light.

*Here you can see the model touching the LED tube, but see how that exposure isn’t blown out on the fingers and is still even on the face.*

LED Tubes

We’ve already established earlier in the article that lights that distribute their power over a large surface have a quicker brightness drop-off. This allows us to use these lights very close to the subject, sometimes even in-shot, and know that they will not overpower the subject. Instead, they offer us a very clean and even light over a large area of the body and this is what’s making them so popular right now. It’s no surprise that every brand is now bringing out LED tubes as they are extremely easy to use and unbelievably forgiving with that aforementioned even drop-off of light. As I said, you’ve seen me use those tubes, literally touching the model in-shot and not blowing out anywhere. Why? Because of the evenly distributed light. I know I’m really drilling this home, but it’s a very new concept to many strobe shooters and I see so many of them continuing to overlook this.

In my featured setup above I’m using 3 tubes surrounding the model. One in the front and one either side of her. These LED tubes are quite literally just out of frame and in some shots they were clipping the bottom of the image. They are extremely close to her and this is to force that very quick drop-off of light again. I’ve spread the light as much as possible and thus as evenly as possible. This is akin to if she was standing on one of those coloured LED floors you see in every Korean dance video. It’s a lot of light, but it’s spread evenly and thus it drops off very evenly too.

LED Tube Positioning

You may or may not have seen how I attached the LED tubes in the BTS above, but essentially I’m using Munsen clips and light stands. I’ve covered this in previous articles, so if you’re interested in more info, take a look here: Lighting Setup: Affordable LED Tubes

Model Posing

You may be wondering why the model was always sat down and why I didn’t get any standing images. Sadly, it was simply logistical limitations. The space was limited and the ceiling was low hence once the top-light was in position, we simply didn’t have room for her to be standing. As it turned out, the model was phenomenal and actually thrived on the restrictions of being sat down. This resulted in some shots where she’s leaning forward or over the lights below which cast some truly gorgeous light across her body. Images that I simply wouldn't have gotten had she been stood the whole time. As usual, you have to capitalise on your limitations, not use them as an excuse.

Tips on Setting up

The top light needs to be just out of frame to maximise that drop-off. I was shooting on a 105mm lens which allowed me to bring that top-light even lower in the frame than if I’d been on a wider lens. The same applies to the LED tubes below. Make sure they are as close as you can get them without them actually being in-frame. Start by exposing your weakest lights at max power first. For me, it was the tubes. I set them to max output and then adjusted my camera around that. Next, I switched on my top-light and adjusted that power accordingly.

Lastly, we don’t have a background light so you’ll have to manage the colour and exposure back there by simply moving your setup closer or further away from the white backdrop behind. I opted for around 3ft/1m to allow for a little bit of spill and if you move too far away, you’ll notice that it gets very dark back there very quickly.

Alternate Setup for Sane People

Where possible, I do try and offer up an alternative setup for those either not able to acquire specialist modifiers, or those simply still using flash instead of LEDs. As we’ve discussed, the light will look different, but if you’re just looking to play with a new idea and don’t want all the hassle of the extra steps, this is a nice substitute.

Pretty simple, right? Large softbox above and a small softbox below. Done. If you just skipped all the way down here, then you just saved yourself 10 minutes! But I will leave you with one final diagram as to why I would urge you to test out some panels when you get a chance.

As I’m illustrating above. Do be prepared for the softbox light to be harder to manage than the panel light. It will appear brighter in the middle when used closely like this, so just be prepared for that.

If you take nothing else from this article then at least remember this; try to spread your light as evenly as possible, as quickly as possible. In this instance, I’m using a large LED panel to do so. Then I want to bring that evenly distributed light as close to my subject as possible to ensure a very fast drop off of light. With these two principles in mind, you should see a dramatic difference in your portrait lighting, especially if you use coloured light.

As always, I wish you luck with the shoot and let me know how you get on.

Products Used

Rotolight

Although I am sharing my own personal thoughts and findings about the lights mentioned in this article, many of you will want to know that I am now a ‘Master of Light’ for Rotolight. As such, I have been given a discount code to share with you when purchasing any of their products via the Rotolight website. Use my code ‘JAKEHICKS10’ when purchasing and you’ll save a bunch of money. I’ve never earned a penny of commission on this though, so if you find a better deal elsewhere, go for it.

Rotolight AEOS 2 PRO

With the AEOS 2 PRO, the world is your studio. Combining the shoot what you see benefits of powerful continuous light with a High Speed RGBWW strobe, AEOS 2 PRO offers unmatched versatility for photographers and filmmakers. Uniquely lightweight with an ultra-thin design, it’s never been easier to achieve beautiful soft light on the move.

AEOS 2 PRO Website Link

Please note that I’ve included affiliate links below for PixaPro and I will benefit (albeit minimally) from the sales of any of these products should you purchase them. To that end, please feel free to use my discount code ‘HICK5-OFF’ at https://www.essentialphoto.co.uk/JAKEHICKSPHOTO to receive a 10% discount on any purchase via their site.

Use Code: HICK5-OFF for 10% Discount on all Essential Photo Products

||

Use Code: HICK5-OFF for 10% Discount on all Essential Photo Products ||

Rainbow Series RGB LED NEON Light Tube

I was using the 120cm long tubes, but be aware that 90cm length tubes are also available. More information on these tubes can be found via the link provided.

Rainbow Series 320-Degree RGB LED Neon Light Tube

JHP Livestreams…

All of my more advanced lighting classes are now available online!

||

All of my more advanced lighting classes are now available online! ||

LEARN MORE ABOUT MY ONLINE WORKSHOPS

How to Eliminate Softbox Hot-Spots

I’m not known for being shy about my hatred of softboxes. Sure, softboxes are often cheap and extremely easy to use, but they rarely produce beautiful light when compared to many other modifiers.

Why the hate?

Softboxes were originally designed to emulate window light. Yes, they often come in the same shape and size as a window, but that is where the similarities end and I defy anyone to show me a window that produces light like a softbox does. The reason for this is simply due to how the light actually arrives at the subject. One light is emanating from millions of miles away and the other is originating from a source mere inches away. It’s this very important factor that can dramatically change how light ultimately looks on its subject and unless we take steps to address this final look, we may simply be ‘making do’ with illuminating our subject rather than actually properly lighting them.

The sun produces beautiful light on us as it collimates the light. Essentially this means that light rays are travelling side by side and straight to us thanks to the sun being so massive and so far away. A softbox on the other hand is very close to us and this sadly throws light out in all directions. As we can see here, the light from those two identical size and shape squares is very, very different.

What’s a Hot-Spot?

Because the light source is often quite close to the subject when shooting portraits (and especially close when managing coloured light properly), this can result in hot-spots appearing in the shot. These hot-spots are simply brighter areas in an image and in studio lighting, they are often caused by the lighting modifiers used.

Softboxes are the biggest offenders of hot-spots as they have a centralised light that spills light out in all directions. If the subject is close to the softbox, then they in turn are closer to the bulb. The closer to the bulb or light source that part of the body is, the brighter it will appear in the frame. Failing to manage these hot-spots effectively can result in unprofessional-looking light and sadly it is very common in a lot of studio portraits today.

To make the most of a softbox, we often bring it in close to the subject. This results in a big, beautifully soft light, but if we’re not careful it can also result in hot-spots being present in our image, especially if we are capturing an image that encompasses more of the body. The centre of the softbox is where the light source is and this is where the brightest part of the subject will be.

What’s the Alternative?

*Fresnel lights have been used on film sets since the 40s for their beautiful-looking light.*

Now that you know what hot-spots are and how softboxes cause them, what are the alternative lighting modifiers to reduce this issue? Thankfully there are many modifiers out there that significantly reduce this effect. Modifiers that collimate the light (send the light in parallel lines to the subject) produce a very beautiful and far cleaner-looking light. Ironically, these modifiers are not new and the fresnel lights have been used on film sets since the 1940s for this reason. Fresnels do require a lot of space though and are great for bigger studios, plus they can be pretty expensive too. There are plenty of other modifiers that do the same and you’ll find my site littered with alternatives as I strive to avoid ever using the dreaded softbox wherever possible. My favourite non-hot-spotting modifier though has to be the beauty dish as this is very easy to use, can be used very close to the subject and even the good ones aren’t prohibitively expensive.

Beauty Dishes

Beauty dishes have a unique property in that they have a diffusion cone placed inside the modifier right in front of the bulb. This diffusion cone takes the brunt of the hot-spot and then proceeds to bounce all of that light back into and around the modifier. This now bounced and diffused light will then exit the modifier before ultimately reaching the subject in a far more even spread of light. Whereas many modifiers that evenly spread the light require some distance to the subject to do so, beauty dishes excel at being close to the subject and this is why a beauty dish is always my number one choice as a key light on set.

As I said, I would use this beauty dish as my key-light at every opportunity as it excels at producing very distributed lighting even in small spaces. To further demonstrate my point, take a look at the example image below as it shows just how prominent the hot-spot on softbox is compared to a beauty dish when used close to the subject.

***Click to enlarge:*** This image shows both a softbox and a beauty dish being fired at a white wall. On the left, we can see a softbox and the type of light spread it produces. As I explained earlier, you can clearly see how the centre of the light is bright and then immediately starts to drop off to shadow pretty aggressively. Compare that to the beauty dish on the right which is clearly doing a far better job at evenly distributing the light and almost entirely eliminating the hot-spot.

Umbrellas vs Stripboxes

Hopefully, I’ve adequately demonstrated above how soft-boxes are convenient, but far from the best choice for portrait lighting. I’ve personally not used a softbox on set (apart from as a fill-light) for over a decade and I have zero intention of doing so any time soon.

The issue with softboxes is not a new one and I’ve been recommending against them for a long time now. Many of you more mature readers will be aware of my early work with gelled lighting and you may even remember that I released a fairly popular video many years ago on how to use gelled lighting in portraits. In said video, I use umbrellas as my edge lights because umbrellas eliminate hot-spots by pointing the light away from the subject and bouncing it back. Umbrellas are a great and very cheap way to produce even lighting, yet I still see people emulating the light I teach in that video not with my recommended umbrellas….. but with the dreaded stripboxes!

I get it, umbrellas are cheap, so they obviously can’t be very good, right? Ironically, this is one of the rare occasions where the cheap alternative is actually pretty good and if we disregard the hilarious £300+ umbrellas from Profoto - please don’t let anyone tell you their umbrellas are worth the ridiculous 10x price!!! - umbrellas are a solid and very affordable lighting modifier. As I said, they point the light away from the subject and the bounced-back returning light is fairly evenly distributed if you can avoid the strobe casting a shadow. But even with that strobe shadow issue in mind, umbrellas are still infinitely better than stripboxes for all of the hot-spotting reasons we’ve outlined above.

Still insist on ruining your photos?

This article has done nothing but tell you ‘you’re doing it wrong’ and although I highly recommend you try alternative modifiers like beauty dishes and umbrellas, what if you still want to try and make softboxes and stripboxes work?

Initial ND Solution

This was an interesting idea when I first decided to tackle this for the article. Can we really target the hot-spot problem and try to fix or alleviate it? My first idea was to reduce the brightness of the centre of the softbox. This should obviously work, right? Reduce the centre brightness, reduce the hot-spot. Initially I opted to try ND or Neutral Density gels in the centre of my softbox.

*I initially started out by using layers of ND gel to reduce the hot-spot effect from stripboxes.*

*The tests involved the softboxes being brought in close and were about 200cm away from the subject.*

I would attach the ND gels to the central diffusion panel that is inside nearly every softbox. This diffusion panel is perfectly placed to attach these gels and I was convinced this would be an easy solution to the hot-spot problem.

I tried all manner of combinations of layers and amounts of ND gels, but ultimately none of them had any significant impact on the hot-spot produced. The light was still brighter in the middle and was just darker overall.

After nearly giving up, it dawned on me that the proper solution had literally been staring me in the face this whole time.

How do beauty dishes solve the hot-spot problem?

The Softbox Beauty Dish combo….. The Beauty-Box?

That’s right, the beauty dish uses a diffusion cone in its centre. This dish stops the hot-spot and then bounces that stopped light back out and this is what the ND gels weren’t doing. Sure, they were reducing the light, but the NDs weren’t bouncing it back out in any meaningful way.

The solution?

Ironically, the solution was just regular old tinfoil. That’s right, the soft malleable metal you wrap your chicken in was the key.

Instead of the ND gels, I now attached the tinfoil to the centre diffusion panel of my softbox and made sure that the shiner side of the tinfoil was the side facing the light.

*By placing tinfoil in the centre of my stripbox, I was able to significantly reduce the hot-spot produced.*

No, this doesn’t look pretty and I’m not saying this will solve all your lighting problems, but I was still surprised at how effective this was. More surprisingly though, was how much of the centre of the softbox I had to cover to make a meaningful difference to the hot-spot. This was a big 35cm x 165cm stripbox and the sheet of foil in there that I ultimately ended up using for the best results was around 70cm long!

JakeHicksPhotography_A (2 of 3)withhs.jpg

JakeHicksPhotography_A (3 of 3)without hs.jpg

JakeHicksPhotography_B (1 of 2)with hs.jpg

JakeHicksPhotography_B (2 of 2) without.jpg

I get it, this is starting to look like an ‘emperors new clothes’ situation here as it doesn’t look vastly different on screen and without saying ‘trust me bro’, you really are going to have to trust me that this DIY tinfoil inner diffusion sheet is doing something.

Is it a solution that I recommend you all go out and cram yards of tinfoil into all of your softboxes? No, certainly not, but it was an interesting demonstration to me just how much of a hot-spot is present in our softboxes and that hot-spot is only magnified when that softbox gets closer to the subject.

*Results from tinfoil placed over the inner baffle of a 60cm x 60cm softbox.*

I also tested the same theory on a smaller 60cmx60cm softbox. Although the results above are less pronounced, you can still see that placing a small sheet of tinfoil over the centre of the inner diffusion panel still has a noticeable effect on the hot-spot.

*I opt to never use stripboxes for my gel work. Instead, I always use umbrellas.*

Closing Comments

Although I did finally arrive at a passable fix to the hot-spot problem of softboxes, it was far harder to eliminate than I first thought. My initial idea was to buy a sheet of Neutral Density gel, throw it in my softbox and a couple of hours later I’d have a working article to share. That was yesterday and that was absolutely not the case as the ND gels were quickly abandoned in favour of raiding the kitchen cabinet for alternatives.

Again, I was amazed at how hard it was to reduce the hot-spot effect and larger and larger sheets of tinfoil were needed to further reduce the bright centre. In fact, to evenly distribute the light around my large stripbox, such a large sheet of tinfoil was needed that it ultimately reduced the light output by nearly 1.5 stops! Sure we have powerful strobes and it’s not too much of an issue, but that may be why we don’t see softbox manufacturers opting for this internal diffusion cone in their softboxes. Surely a little shiny square in the middle of the diffusion baffle would go a long way…. but at the cost of 1.5 stops of light?!

Beauty dishes get away with the diffusion cone due to them also having a parabolic curve to reflect the bounced light back out in an optimal way thereby negating a large amount of the lost light a softbox would.

So no, I don’t recommend you fill your softboxes with tinfoil just yet, but I still think this trick is a useful one to be aware of. You never know, you may be in a situation where you’re shooting in a tight space and you simply cannot get your softbox back away from the subject enough. With this predicament in mind, a sheet of tinfoil in your softbox may well be just the thing you need to spread that light more evenly in that tight spot.

I will wrap this all up with a final thought though as I hope that if nothing else, you’ve learned that softboxes produce unsightly hot-spots when used in close to the subject. As an alternative, I urge you to try a beauty dish instead as I swear you’ll be blown away by the difference. Yes, I know some beauty dishes can be expensive and at first glance, they may look the same, but if you can afford it, I recommend you look for a beauty dish with a more pronounced curve to get the best possible lighting with almost no hot-spot at all.

I’m loathed to include a link here as I know it just looks like I’m flogging my affiliate code, so please, if you find a better alternative, just use that instead. That said, my old Bownes beauty dish is a beautiful shape and I insist on using it. Sadly Bowens no longer exists, but of course, Godox has somehow managed to ‘adopt’ that original Bowens shape and now make an excellent dish instead.

22” White Beauty Dish

The 22”/55cm white beauty dish is what I always use on my key-light and I love this thing!

A silver one is also available, but that will add more contrast to the shot so choose accordingly - the white one is simply more versatile.

Godox White Beauty Dish

Please note that I’ve included affiliate links above for PixaPro and I will benefit (albeit minimally) from the sales of any of these products should you purchase them. To that end, please feel free to use my discount code ‘HICK5-OFF’ at essentialphoto.co.uk/JAKEHICKSPHOTO to receive a 10% discount on any purchase via their site.

I wish you luck with your future shoots and I hope you’re now a little more aware of what to keep an eye on when using softboxes. But again, here is your weekly reminder to burn all of your softboxes.

JHP Livestreams…

ONLINE WORKSHOPS - LEARN MORE

Lighting Setup: Studio Lighting with Lasers!

I was struggling with the title for this one and although it sounds like ridiculous click-bait, this lighting setup really is about using lasers alongside our more traditional studio lights.

I’m someone who gets bored extremely quickly and although there’s probably a modern medical term for that ‘personality trait’ today, I choose to lean into this quality as it typically forces me to keep playing with new ideas AKA ‘be creative’.

With this creative itch always niggling at the back of my brain, I’m always on the lookout for new ways to keep things interesting in the studio. Sure, there is a time and place for tried and true lighting setups, but it’s always fun to break the rules and try something completely different once in a while. With this in mind, I’m continually searching for new ways to illuminate my subjects. Sure, there are thousands of purpose-built lighting modifiers for us to try, but there are also tons of other, far more ‘creative’ ways to illuminate our subjects too.

My wife can attest to this but I have boxes of ‘nerd-shit’ as she calls it, which contain vast numbers of items that emit light. Some of them don’t even emit light at all and an abstract silver fruit bowl and silver-painted satellite dish all patiently await their moment to ‘shine’ in the studio.

I’m not exaggerating either, I really do have boxes of this stuff that I purchase and think ‘I’ll use that one day’ and today was the turn of an old laser pen I’d bought many years ago.

Laser Pen

You’ll be pleased to hear that this week’s setup involves a very affordable light as the light in question is actually just a simple laser pen which can be purchased for around £10 - £15. There’s nothing particularly fancy about these laser pens, although if you want to get some interesting shots with a little variety, I recommend getting one that comes with some additional filters and features. For example, the most common colour these lasers come in is green. I’m not a huge fan of green on the skin for portraits so I’d recommend getting one with either a red or blue variant. The other important thing to look for is the filters that come with them. As we know, all lasers are emitted from a single point and as cool as this is, the single red dot is not very exciting to look at when used in conjunction with studio portraits unless you’re going for the assassin cosplay look. With this in mind, I recommend you find a laser that comes with a bunch of filters to spread, separate, scatter and otherwise modify that single beam.

As I mentioned, there are a multitude of options, none of them are particularly expensive and I’ll speak about what I went with later in the article.

You’ve Been Warned: I know you’re not an idiot but if I don’t say this I know I’ll get messages about it, but please be careful when using lasers. Don’t point them in your eye and don’t point them directly into your camera as lenses can magnify them to the point that they could damage the sensor. Most of these commercially available lasers are fine as long as you’re not staring into to them for prolonged periods, but it’s better to be safe than sorry. Plus, always pass this warning along to the models and team on set too.

The Setup

Now that you know what we’re dealing with in regards to the specialist light included in this setup, I’ll go over the setup in full and then break down any pertinent sections afterwards.

*Rotolight NEO 3 Pro as a background light set to blue*

*2 of the Godox TL30’s joined together and used as a fill light set to red*

*The laser pen is clamped up high next to the key light (AEOS 2 Pro set to white light ~4500K)*

TL;DR/ADHD/Artist Setup Explanation

Position small light set to a blue colour/attach blue gel against white backdrop
Place white key-light up high and angled down towards model
Have a large soft-light set to red/red gel attached behind you pointed towards backdrop
Position smaller light just out of shot as fill-light set to red/red gel attached
Lastly, place laser pen up high next to key-light and angle towards model

Kit Used

2x Rotolight AEOS 2 Pro
1x NEO 3 Pro
1x R120 Parabolic attached to the AEOS
2x (joined) Godox TL30
Laser Pen
White Backdrop

Camera Settings

Camera - Nikon D850
Lens - 24-70mm f2.8
Shutter Speed - 1/125th
Aperture - f2.8
ISO - 200
Kelvin - 4300K
Focal Length - ~58mm

The Results

Click to enlarge any of the shots below.

Model: Little B

Breaking it Down

I’m sure a lot of this is fairly straightforward to many of you and the core underlying setup of this shot is essentially your standard key-light, fill-light and background light. But let’s go over a couple of the details in case there’s anything that doesn’t make sense.

Background Light

I have my background light as a Rotolight NEO 3 Pro and the reason for that is because it’s small and very easy to hide behind the model. If you’re using a light back here, I’d advise the same and place it close enough to the backdrop to manage the vignette of colour accordingly. For example, place the light close enough, maybe 12 inches away (30cm) from the white background so that you get a small spot of colour. I have mine set to a bold blue colour that harmonises well with the vibrant red. For example, a deep navy-blue colour goes well alongside a bold blood-red colour.

Fill-Light

For this, I’m actually using 2 Godox TL30’s screwed together to make a 60cm tube light. I’ve only recently acquired this light, but it’s proving very useful as a fill light. Why? This tube works well when placed close as it spreads light along its length but the power of the light drops off very quickly. For example, it’ll be bright on the chest, but drop off to almost no power on the face making it very controllable. If you don’t have a tube here, then any typical fill-light like a small softbox or even a white umbrella can work well too. I have mine set to a bold red colour to match the red from the laser light.

Global Fill-Light

You’ve likely seen me use this technique a lot in my setups and it's a very effective way to add complimentary light and colours to the scene. If you’re not sure what light I’m referring to here, then it's the large softbox you can see in the diagram above. I have a Rotolight AEOS 2 Pro in my 120cm Softbox here, but again, any large softbox and light combo will work. I have mine set to the same bold red as my fill-light as well as the red laser. The one role of this light is to add a little illumination to the model's shadow areas, but primarily it illuminates the dark vignette left via the blue background light.

Key-Light

The key-lights are typically the easiest light in a set to place as they’re what I refer to as my ‘objective’ lights. There is no ambiguity in their role on set as they must correctly expose the model's skin. Other ‘subjective’ lights can be bright or dim based on personal taste, but the objective lights must be accurate. I’m using my favourite key with my Rotolight AEOS 2 Pro set to around 4500K, but you could also use a beauty dish here as an alternative.

Laser Pen

The fifth and final light here is the (tiny) star of the show, the laser pen. As you can see from the BTS shots above, I clamped it in place via a SuperClamp, but you can use whatever method you like to keep it where you want it. My advice for position; keep it as close to the key light as you can get. That way, neither the laser nor your key is casting conflicting shadows and again, you can see in the BTS above that it’s mounted right next to the AEOS.

Points to Keep in Mind

Laser Pen

I spoke about this at the top, but I’ll go into a little more detail here with regards to the laser pen. As I mentioned, try to get a red or blue one as the green (more popular) ones wont look good on the skin. By all means try it for yourself, but that’s just my recommendation. Alternatively, just get one that has all the 3 colours and play with what works best on the day. Edit: I’ve seen some lasers that also produce a violet-coloured laser - I could see that one being a cool colour to try too.

The other factor is the creative options when it comes to the laser filters. If you just purchase a simple laser pen (the one you tease those poor cats with), you’ll simply get a single, tiny bright dot. We want a laser with some filters that actually refract that single beam of light into a bunch of different shapes and looks.

*Many laser pens will have a variety of ways to refract the single-dot laser and I’d urge you to get one that comes with some options.*

*Once you have laser filters, it’s a good idea to test them all to see what will work.*

Pictured above you can see some of the effects that come with the laser pen I tested. Not all of them are ideal for portraits, but the variety will help you find something that works. I personally preferred the dots and stars as they had a very noticeable effect on the skin.

Colours

I’m sure it's fairly obvious by now that I love to incorporate colours into nearly all of my shots. Here I was choosing my coloured lights based on the laser colour being red. Red is a very bold colour so I opted for another equally bold colour to compliment it. That said, reds bold and dominating colour is pretty tricky to work with, so if you see some other coloured lasers on offer, definitely consider getting them as I could see the blue or even violet lasers being a little more versatile to work with.

If you’re not particularly confident with coloured lights then there’s nothing wrong with just trying white light instead. I could see a very bold red laser standing out nicely against regular white-light on the skin.

Closing Comments

This is one of those setups that is fun to play with. Will it make it into your regular rotation of looks? Maybe not, but pulling a few ideas out of the lighting toolbox every now and then is a lot of fun, plus you never know what other ideas may be triggered by this. After all, trying something new and being creative is never time wasted. I wish you luck and if you give this one a go and let me know if you do as I’d love to see the results.

Products Used

Rotolight

Rotolight AEOS 2 PRO

AEOS 2 PRO Website Link

Rotolight R120 Sofbox

A softbox is pretty much a must-have piece of kit for any studio shooter, so if you own any AEOS 2/Pros, this is certainly worth taking a look at. It comes with internal baffles as well as the eggcrate grid on the front. Plus, it has 16 sides making this an incredibly round and clean light source.

R120 Softbox Website Link

Rotolight NEO 3 PRO

Small but mighty, NEO 3 PRO is the brightest LED on-camera light ever made. Experience unrivalled power and industry-first innovations in a compact form factor you can take anywhere.

NEO 3 PRO combines the shoot-what-you-see benefits of continuous light, with a High Speed Sync RGBWW flash for unlimited creative possibilities.

NEO 3 PRO Website Link

Please note that I’ve included affiliate links below for PixaPro and I will benefit (albeit minimally) from the sales of any of these products should you purchase them. To that end, please feel free to use my discount code ‘HICK5-OFF’ at Essential Photo to receive a discount on any purchase via their site.

TL30-K2 RGB LED Tube

A 2 light LED kit that includes 2x 30cm full RGB LED tubes plus a whole host of useful accessories including grids and mounting clamps.

TL30-K2 Two Light Kit Link

JHP Livestreams…

ONLINE WORKSHOPS - LEARN MORE